#######################################################
# VAP 1 config section
#######################################################
# Simple Config Configuration File
# Lines that start with # are treated as comments
# Each line should not exceed 80 characters
# Format: TYPE=value
#
START_OF_VAP_CONFIG_1
# Configured Mode: 1=Unconfigured AP, 2=Client, 3=Registrar,
# 4=AP with Proxy, 5 = AP with Proxy and Registrar
CONFIGURED_MODE=1
# Is the standalone Registrar (mode 3) wireless-enabled
# Yes: 1, No:0
REGISTRAR_WIRELESS=0
# Should UPnP be used (for modes 1 and 3)
# Yes: 1, No:0
USE_UPNP=1
UUID=0x565aa94967c14c0eaa8ff349e6f59311
VERSION=0x10
DEVICE_NAME=Atheros AP
# Primary Device Categories: Please refer to the SC spec for
# values for the following types
PRI_DEV_CATEGORY=6
PRI_DEV_OUI=0x50f204
PRI_DEV_SUB_CATEGORY=1
# MAC Address of the local device, 6 byte value
MAC_ADDRESS=0x00037f00ceca
MANUFACTURER=Atheros
MODEL_NAME=Sample String 1
MODEL_NUMBER=1234
SERIAL_NUMBER=5678
# Config Methods: bitwise OR of values
CONFIG_METHODS=0x84
# Auth type flags: bitwise OR of values
AUTH_TYPE_FLAGS=0x1
# Encr type flags: bitwise OR of values
ENCR_TYPE_FLAGS=0x1
CONN_TYPE_FLAGS=0x1
RF_BAND=3
OS_VER=0x80000000
FEATURE_ID=0x80000000
# SSID:
# For unconfigured client: What it should connect to when
# starting EAP-WSC
# Example: SSID=WscSecureAP
# For unconfigured AP: Initial broadcast SSID
# Example: SSID=WscNewAP
# For Registrar: SSID that the supplicant must connect to when
# starting EAP-WSC
# Example: SSID=WscNewAP
# For AP with Registrar: Broadcast SSID
# Example: SSID=WscSecureAP
SSID=WscAtherosAP1
# Key Mgmt for Supplicant (Client, Registrar):
# Unconfigured, doing WSC: WPA-EAP IEEE8021X
# Configured after WSC (will be done by the s/w): WPA-PSK
# Key Mgmt for Hostapd (AP, AP with Registrar):
# Unconfigured, doing WSC: WPA-EAP
# Configured after WSC (will be done by the s/w): WPA-PSK
# Configured, plus Registrar: WPA-EAP WPA-PSK
KEY_MGMT=OPEN
# Are we using a USB key to transfer PIN/Credential?
# Yes: 1, No:0
USB_KEY=0
# Is the Network Key set?
# Yes: 0xValue or passphrase, No: comment out line
# NW_KEY=0x000102030405060708090A0B0C0D0E0F000102030405060708090A0B0C0D0E0F
# NW_KEY=passphrase
NW_KEY=
END_OF_VAP_CONFIG_1

#######################################################
# VAP 2 config section
#######################################################
# Simple Config Configuration File
# Lines that start with # are treated as comments
# Each line should not exceed 80 characters
# Format: TYPE=value
#
START_OF_VAP_CONFIG_2
# Configured Mode: 1=Unconfigured AP, 2=Client, 3=Registrar,
# 4=AP with Proxy, 5 = AP with Proxy and Registrar
CONFIGURED_MODE=1
# Is the standalone Registrar (mode 3) wireless-enabled
# Yes: 1, No:0
REGISTRAR_WIRELESS=0
# Should UPnP be used (for modes 1 and 3)
# Yes: 1, No:0
USE_UPNP=1
UUID=0x565aa94967c14c0eaa8ff349e6f59311
VERSION=0x10
DEVICE_NAME=Atheros AP
# Primary Device Categories: Please refer to the SC spec for
# values for the following types
PRI_DEV_CATEGORY=6
PRI_DEV_OUI=0x50f204
PRI_DEV_SUB_CATEGORY=1
# MAC Address of the local device, 6 byte value
MAC_ADDRESS=0x00037f00ceca
MANUFACTURER=Atheros
MODEL_NAME=Sample String 1
MODEL_NUMBER=1234
SERIAL_NUMBER=5678
# Config Methods: bitwise OR of values
CONFIG_METHODS=0x84
# Auth type flags: bitwise OR of values
AUTH_TYPE_FLAGS=0x1
# Encr type flags: bitwise OR of values
ENCR_TYPE_FLAGS=0x1
CONN_TYPE_FLAGS=0x1
RF_BAND=3
OS_VER=0x80000000
FEATURE_ID=0x80000000
# SSID:
# For unconfigured client: What it should connect to when
# starting EAP-WSC
# Example: SSID=WscSecureAP
# For unconfigured AP: Initial broadcast SSID
# Example: SSID=WscNewAP
# For Registrar: SSID that the supplicant must connect to when
# starting EAP-WSC
# Example: SSID=WscNewAP
# For AP with Registrar: Broadcast SSID
# Example: SSID=WscSecureAP
SSID=WscAtherosAP2
# Key Mgmt for Supplicant (Client, Registrar):
# Unconfigured, doing WSC: WPA-EAP IEEE8021X
# Configured after WSC (will be done by the s/w): WPA-PSK
# Key Mgmt for Hostapd (AP, AP with Registrar):
# Unconfigured, doing WSC: WPA-EAP
# Configured after WSC (will be done by the s/w): WPA-PSK
# Configured, plus Registrar: WPA-EAP WPA-PSK
KEY_MGMT=OPEN
# Are we using a USB key to transfer PIN/Credential?
# Yes: 1, No:0
USB_KEY=0
# Is the Network Key set?
# Yes: 0xValue or passphrase, No: comment out line
# NW_KEY=0x000102030405060708090A0B0C0D0E0F000102030405060708090A0B0C0D0E0F
# NW_KEY=passphrase
NW_KEY=
END_OF_VAP_CONFIG_2

#######################################################
# VAP 3 config section
#######################################################
# Simple Config Configuration File
# Lines that start with # are treated as comments
# Each line should not exceed 80 characters
# Format: TYPE=value
#
START_OF_VAP_CONFIG_3
# Configured Mode: 1=Unconfigured AP, 2=Client, 3=Registrar,
# 4=AP with Proxy, 5 = AP with Proxy and Registrar
CONFIGURED_MODE=1
# Is the standalone Registrar (mode 3) wireless-enabled
# Yes: 1, No:0
REGISTRAR_WIRELESS=0
# Should UPnP be used (for modes 1 and 3)
# Yes: 1, No:0
USE_UPNP=1
UUID=0x565aa94967c14c0eaa8ff349e6f59311
VERSION=0x10
DEVICE_NAME=Atheros AP
# Primary Device Categories: Please refer to the SC spec for
# values for the following types
PRI_DEV_CATEGORY=6
PRI_DEV_OUI=0x50f204
PRI_DEV_SUB_CATEGORY=1
# MAC Address of the local device, 6 byte value
MAC_ADDRESS=0x00037f00ceca
MANUFACTURER=Atheros
MODEL_NAME=Sample String 1
MODEL_NUMBER=1234
SERIAL_NUMBER=5678
# Config Methods: bitwise OR of values
CONFIG_METHODS=0x84
# Auth type flags: bitwise OR of values
AUTH_TYPE_FLAGS=0x1
# Encr type flags: bitwise OR of values
ENCR_TYPE_FLAGS=0x1
CONN_TYPE_FLAGS=0x1
RF_BAND=3
OS_VER=0x80000000
FEATURE_ID=0x80000000
# SSID:
# For unconfigured client: What it should connect to when
# starting EAP-WSC
# Example: SSID=WscSecureAP
# For unconfigured AP: Initial broadcast SSID
# Example: SSID=WscNewAP
# For Registrar: SSID that the supplicant must connect to when
# starting EAP-WSC
# Example: SSID=WscNewAP
# For AP with Registrar: Broadcast SSID
# Example: SSID=WscSecureAP
SSID=WscAtherosAP3
# Key Mgmt for Supplicant (Client, Registrar):
# Unconfigured, doing WSC: WPA-EAP IEEE8021X
# Configured after WSC (will be done by the s/w): WPA-PSK
# Key Mgmt for Hostapd (AP, AP with Registrar):
# Unconfigured, doing WSC: WPA-EAP
# Configured after WSC (will be done by the s/w): WPA-PSK
# Configured, plus Registrar: WPA-EAP WPA-PSK
KEY_MGMT=OPEN
# Are we using a USB key to transfer PIN/Credential?
# Yes: 1, No:0
USB_KEY=0
# Is the Network Key set?
# Yes: 0xValue or passphrase, No: comment out line
# NW_KEY=0x000102030405060708090A0B0C0D0E0F000102030405060708090A0B0C0D0E0F
# NW_KEY=passphrase
NW_KEY=
END_OF_VAP_CONFIG_3

#######################################################
# VAP 4 config section
#######################################################
# Simple Config Configuration File
# Lines that start with # are treated as comments
# Each line should not exceed 80 characters
# Format: TYPE=value
#
START_OF_VAP_CONFIG_4
# Configured Mode: 1=Unconfigured AP, 2=Client, 3=Registrar,
# 4=AP with Proxy, 5 = AP with Proxy and Registrar
CONFIGURED_MODE=1
# Is the standalone Registrar (mode 3) wireless-enabled
# Yes: 1, No:0
REGISTRAR_WIRELESS=0
# Should UPnP be used (for modes 1 and 3)
# Yes: 1, No:0
USE_UPNP=1
UUID=0x565aa94967c14c0eaa8ff349e6f59311
VERSION=0x10
DEVICE_NAME=Atheros AP
# Primary Device Categories: Please refer to the SC spec for
# values for the following types
PRI_DEV_CATEGORY=6
PRI_DEV_OUI=0x50f204
PRI_DEV_SUB_CATEGORY=1
# MAC Address of the local device, 6 byte value
MAC_ADDRESS=0x00037f00ceca
MANUFACTURER=Atheros
MODEL_NAME=Sample String 1
MODEL_NUMBER=1234
SERIAL_NUMBER=5678
# Config Methods: bitwise OR of values
CONFIG_METHODS=0x84
# Auth type flags: bitwise OR of values
AUTH_TYPE_FLAGS=0x1
# Encr type flags: bitwise OR of values
ENCR_TYPE_FLAGS=0x1
CONN_TYPE_FLAGS=0x1
RF_BAND=3
OS_VER=0x80000000
FEATURE_ID=0x80000000
# SSID:
# For unconfigured client: What it should connect to when
# starting EAP-WSC
# Example: SSID=WscSecureAP
# For unconfigured AP: Initial broadcast SSID
# Example: SSID=WscNewAP
# For Registrar: SSID that the supplicant must connect to when
# starting EAP-WSC
# Example: SSID=WscNewAP
# For AP with Registrar: Broadcast SSID
# Example: SSID=WscSecureAP
SSID=WscAtherosAP4
# Key Mgmt for Supplicant (Client, Registrar):
# Unconfigured, doing WSC: WPA-EAP IEEE8021X
# Configured after WSC (will be done by the s/w): WPA-PSK
# Key Mgmt for Hostapd (AP, AP with Registrar):
# Unconfigured, doing WSC: WPA-EAP
# Configured after WSC (will be done by the s/w): WPA-PSK
# Configured, plus Registrar: WPA-EAP WPA-PSK
KEY_MGMT=OPEN
# Are we using a USB key to transfer PIN/Credential?
# Yes: 1, No:0
USB_KEY=0
# Is the Network Key set?
# Yes: 0xValue or passphrase, No: comment out line
# NW_KEY=0x000102030405060708090A0B0C0D0E0F000102030405060708090A0B0C0D0E0F
# NW_KEY=passphrase
NW_KEY=
END_OF_VAP_CONFIG_4

END_OF_CONFIG
